Gulfcoat IEA-OC-006 Marineclear Anti Corrosion spray Protection Coating Aerosol 12oz corrosion preventative inhibitor formulated to improve adhesion, moisture resistance, UV protection Modine

SKU
GIEAOC006
Gulfcoat IEA-OC-006 Marineclear Anti Corrosion spray Protection Coating Aerosol 12oz corrosion preventative inhibitor formulated to improve adhesion, moisture resistance, UV protection Modine
Use: Developed in response to customer demand for a protective coating to be applied on small jobs and or in remote areas. Original Designed for HVAC Coil, can be applied to any surface
Corrosion Resistance: Products have a robust synthetic multi-polymer resin backbone that is suitable for most environments and will maintain its appearance after many years exposure to the elements
UV Degradation: Built in enhanced UV inhibitors form a protective barrier throughout the paint film. As a result, UV degradation of individual polymer molecules are reduced and the film integrity maintained
Gloss Retention: A high gloss finish is applied that is smooth, limits dirt and debris buildup, and allows for easy equipment cleaning
Resistance: Corrosion durability shall be confirmed through testing to no less than 5,000 hours salt spray resistance per DIN 53167 (ASTM B117-11) using aluminum test coupons

Weight : 1.08 LBR
Volume : 0.03 FTQ
Model : IEA-OC-006
UPC-EAN : 850021531027

Spray Applied Corrosion Resistant Coating

GulfCoat marine coatings provide a HVAC COIL coating system for added corrosion protection on aluminum and copper finned RTPF and MCHX coils. GulfCoat coatings help to reduce the accelerated corrosion of HVAC coils. By following the coating and maintenance instructions, end users should expect extended life cycles and keep the energy consumption to a nominal level.

Directions

Surface must be free of grease, rust, and wax. Prior to coating, follow these steps:

Clean coils with appropriate cleaner ndash; use GulfCoat Surface Prep
Rinse with clean water
Allow coil to thoroughly dry
Mask off or protect areas from overspray
Allow product can to warm to room temperature
Mask off or protect areas from overspray. Allow the can to warm to room temperature. Shake until mixing ball rattles, then continue to shake for two minutes. Move can with light to medium strokes. Let paint become tacky between coats. After use, invert can and spray to clear valve.

Product Description

GulfCoat MarineBlue, MarineClear, and MarineGold corrosion resistant coatings are specifically designed for the protection of HVAC coils and components. GulfCoat MarineBlue is formulated to improve adhesion, moisture resistance, UV protection, and corrosion resistance. The product can be applied on-site or at your premises after HVAC units have been manufactured and installed.

Specifications

HVAC coil and components shall have GulfCoat MarineBlue, MarineClear, and MarineGold spray applied with no runs or sags. The spray coating process should ensure a uniform dry film thickness of 10-36 mu;m (0.4 -1.4 mils) and meet 5B rating for crosshatch adhesion per ASTM D3359-09. Corrosion durability shall be confirmed through testing to no less than 5,000 hours salt spray resistance per DIN 53167 (ASTM B117-11) using aluminum test coupons.

GIEAOC006
New

Data sheet

Product Feature
  • Corrosion Resistance: Products have a robust synthetic multi-polymer resin backbone that is suitable for most environments and will maintain its appearance after many years exposure to the elements
  • Gloss Retention: A high gloss finish is applied that is smooth, limits dirt and debris buildup, and allows for easy equipment cleaning
  • Resistance: Corrosion durability shall be confirmed through testing to no less than 5,000 hours salt spray resistance per DIN 53167 (ASTM B117-11) using aluminum test coupons
  • UV Degradation: Built in enhanced UV inhibitors form a protective barrier throughout the paint film. As a result, UV degradation of individual polymer molecules are reduced and the film integrity maintained
  • Use: Developed in response to customer demand for a protective coating to be applied on small jobs and or in remote areas. Original Designed for HVAC Coil, can be applied to any surface
  • Weight
    1.08 LBR
    Volume
    0.03 FTQ
    Model
    IEA-OC-006
    UPC-EAN
    850021531027
    Sales Unit
    EA
    Origin
    USA
    US Tariff Code
    3403.19.5000
    Base Unit
    EA
    Dimensions
    2.5 x 8.5 x 2.5

    Download

    Safety Data Sheet

    Safety Data Sheet

    Download (250.57KB)

    Compare (0 items) Contact us
    Please login first